All types of drawbar trailer are available for various applications ranging from lightweight farming applications where slow speeds are required to 3 axle heavy duty units to be towed by large 6x4 rigid trucks on bad roads at high speeds.

Draw bar trailers are available as flat decks, dropsides, vans, tankers etc...

Speak to us about your exact requirements.

Manufactured in Modular form the Personnel Carrier is available in almost every dimension. This concept allows for backup spare parts to be carried on the shelf. The exterior skin is produced from 0,9mm thick aluminium alloy. Cold rolled Z-shaped galvanized stiffeners are spaced at 406mm intervals on both sides and roof. Each section is contained in specially extruded aluminium sections, which when monobolted together, add to strength and rigidity. Solid aluminium rivets and monobolts (instead of pop rivets) are used in the manufacture.
The carrier can seat up to 120 people and for additional comfort the roof is insulated with 40mm polystyrene and clad with painted and tempered Masonite.

SEMI TRAILER SINGLE AXLE

TWO MEMBER FRAME

MAIN BEAMS: Fabricated from 5mm Mild Steel web and 100 x 20 high tensile top and bottom flanges.
CROSS MEMBERS: 100 x 50 x 5 M.S. pressed channels.
RUBBING PLATE: 10mm M.S. plate reinforced with extra deep cross members.
KINGPIN : Std. 50mm SAE pin manufactured from BS-870-653DH31 and secured with castellated nut and split pin.
LANDING LEGS: JOST E200 G, two speed, steel, square leg, heavy duty sand shoes, braced to withstand loading from any angle. Near side operation.
SUSPENSION: Protea Model SMT 408S single Multi-leaf suspension.
AXLE: Model TM22500 series trailer axle, 1816mm track, 420 x 180 S-cam brakes, hubs with 10 studs on 335mm PCD. (7/8" BSF or 22mm x 1,5 pitch) including standard slack adjusters and air chambers. Axle inboard brake drums.
BRAKES: Protea 420 x 180 S-cam, designed to meet higher brake regulations.
RIMS: 7.5 X 20 disc type, hi-tensile steel with 11mm thick nave, 10 stud.
BRAKE OPERATING PARTS: Conforming to latest S.A.B.S. standards.
LIGHTS & WIRING: DIN 7 pin socket 12 volt system, combination stop, turn and double taillights, with heavy duty bulbs.
TYRES: 11.00 x 20 x 14 ply rated 5 off.
MUDFLAPS: Motor Body Constructions anti-sail.
SPARE WHEEL CARRIER : Basket type carrier 1 off.