|
| |
 |
| Mild steel vans for any type of unit |
 |
MILD STEEL CLADDED VAN
SIZE:
Length - To suit chassis
Width: 2360 (Internal)
Height of sides: To requirements
MOUNTING: The body is mounted on 178 x 54 rolled steel channel longitudinals which are
welded to the 76 x 38 steel channel cross member with triangle steel gussets securing the
cross member to the longitudes and the longitudes to the chassis with ‘U’ bolts
as per manufacturers requirements.
FLOOR: The floor is constructed of 2,8mm or 4,5mm mild steel plate supported by 76 x 38mm
R.S.C. sections welded laterally over the longitudes.
SIDES, FRONT AND REAR: These are constructed of 1,0mm mild steel sheets huck bolted to 2mm
thick mild steel top hat sections spaced 400mm apart.
CORNERS: All corners are square and are a 2mm bent up section.
ROOF: 1,0mm steel sheets are huck bolted to the channel mild steel roof sticks.
TAILLIGHT BOX: A full width recessed box to accommodate taillights, indicators, chevron
and reflectors.
BUMPER: An Underrun bumper will be fitted.
REAR LOADING DOORS: Double rear doors are provided with a steel angle framework.
Additional side doors are an optional extra with longer vans.
FINISH: All welding slag, dirt and grease will be removed and material given a coat of
corrosion inhibiting primer. Body will be finished painted in two coats of good quality
industrial enamel to required thickness and in the colour specified.
|
WELTEVREDEN CAR &
TRUCK CC