Use our Table of Contents and Search Pages for easy navigation
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||
![]() |
| The PANTSER 30H Wrecker on a MACK chassis with a lot of extras on the truck including crew cab, bull bar, front winch, additional storage lockers, additional brake lines, etc |
|
GENERAL SPECIFICATIONS |
|
Preferred Truck Chassis: 25500 to 37000 kg GVM (56000 to 80000 lbs GVW) - either 6x4 or 6x6 |
|
RATINGS |
|
| Two booms, fully retracted, locked at rear, vertical lift | 30000 kg |
| Single boom, fully retracted, vertical lift | 15000 kg |
| Single boom, fully extended, vertical lift | 7500 kg |
| Drum | 30000 kg |
| Boom cable Main Boom | 2 off, 100m long, 16mm diameter |
| Cable lifting | 2 off, 100m long, 14mm diameter |
| Hydraulic Motor Type | SAI MT150 |
| Hydraulic Tank capacity | 180 litres |
| Hydraulic Fluid Type | Mobil DTE27 or equal |
| Total Mass |
2007kg |
| ADDITIONAL INFORMATION | |
| Working length of boom (retracted) | 3950mm |
| Working length boom (extended) | 6390mm |
| Extension of boom over tailgate fully extended Maximum elevation Minimum elevation |
230mm 3340mm |
| Height of service hook above ground with boom fully extended Maximum elevation Minimum elevation |
5970mm 635mm |
| Boom extension over side of vehicle (boom fully extended) Maximum elevation Minimum elevation |
2730mm 5840mm |
| Height of service hook with boom fully extended over side of the vehicle Maximum elevation Minimum elevation |
5970mm |
Pantser 20H Series II
Pantser 26H Series II
Pantser 30H Series II
![]()
TRUCK CHASSIS
Downloadable specifications - Follow this link for specifications...
|
©1996-2008 Weltevreden Car & Truck CC |