|From 8m3 to 14m3 capacity or larger
ROQTUF TIPPING BODY 10 CUBIC
FRONT OF BODY HOIST
Internal length - to suit chassis
Internal width - 2290mm
Internal height - to suit chassis and volume requirement.
FLOOR: 8mm Roqtuf plate and 76 x 38mm rolled channel cross members.
SIDES: 6mm mild steel fixed sides with vertical stiffeners and heavy duty rub rails.
TAILGATE: 6mm mild steel reinforced top or bottom hinged tailgate controlled by lever at
front of body or automatic control.
HOIST: Hyva 30 ton capacity front of body hoist model FEE141-4-3430 hydraulic cylinder
giving a 45 degree tipping angle, tipping speed +/- 30 seconds.
PUMP: Gear type pump close coupled P.T.O. with a displacement of 65 cm 3/REV. with a
pressure set at 150 bar. P.T.O. and controls to be supplied by chassis supplier.
HOIST CONTROLS: Hydraulic control valves for up and down. All controlled from cab.
SAFETY PROP: Robust support for body in semi raised position.
MOUNTING: Body mounted in accordance with chassis manufacturers requirements.
FINISH: Metal descaled, phosphate coated and primed with zinc chromate. Body will be
finished painted in two coats of good quality industrial enamel to required thickness and
in the colour specified.
PAINT: Paint as cab or one colour to customer requirements.